Instructions

17.3 Menu 9.9.3 - Setting the solar mode

This function enables you to determine how the Troll Comfort

DuoFern reacts to signals from a locally connected light sensor

or control commands from a central sun shading controller (e.g.

a DuoFern radio sun sensor).

The subsequent conguration of the automated solar functions

is correspondingly inuenced by the selection of the solar mode.

The following solar modes can be selected:

[ 1 ] = Local light sensor

[ 2 ] = Transmitter (local light sensor and transmitter

function)

[ 3 ] = Receiver (external sun sensor)

Mode [ 1 ] - Local light sensor *

Select mode [ 1 ] if ...

◆ ...the Troll Comfort DuoFern is to be controlled by a light

sensor connected to this device.

Functions and settings for the automated

solar function:

◆ The roller shutters close to the position of the light sensor

on the window.

◆ The solar limit value must be congured in menu 4.

◆ Mount the light sensor on the window at the position to

which the roller shutters should lower when the sun shines.