Instructions

37
EN
16.1 Moving to a target position
If necessary, you can enter an arbitrary target position for
your roller shutters which you can then move to directly. The
Troll Comfort DuoFern is able to move to the target position and
stop the roller shutters fully independently and automatically.
It is not necessary to give an additional manual movement or
stop command.
Automatic movement after approx. two seconds.
The system will initiate movement to the congured target posi-
tion automatically if no button is pressed for approx. two seconds.
NOTE
◆ In order to use this function, it is necessary to previously
determine and congure the running time for the con-
nected tubular motor, see page 87.
◆ The ventilation position is ignored when moving to the
target position.
1.
Display the current posi-
tion of the roller shutters
by briey pressing one of
the buttons.
3.
The roller shutters will
automatically move to
the target position and
stop after approx. two
seconds.
2.
Enter the desired target
position by repeatedly
pressing the key
(e.g. 20 %).
The current position is given
as a percentage [ % ].
The arrows [
/ ] indicate the
resulting direction of travel.
Value = roller shutter position:
0 % = fully opened
100 % = fully closed