Instructions

29
i
[ 1 ]
[ 2 ]
[ 3 ]
[ 5 ]
EN
13. Assembly
The Troll Comfort DuoFern is designed for flush-mounted
installation.
For this, you require a 58 mm ush-mounted box. We
recommend using a deep box.
Installation procedure:
1. Switch o the mains.
2. Make the electrical connection according to the wiring diagram
(see page 27 / 28).
3. Route the power cables to the ush-mounted box.
4. Slide the installation housing [ 3 ] into the ush-mounted box and
clamp the claws [ 5 ] in place with the screws provided.
5. Fit the frame [ 2 ].
6. Carefully insert the operating unit [ 1 ] into the installation
housing [ 3 ].
7. Switch the mains power again back on again.
Mounting the light sensor, see page 64.