Instructions
25
EN
Parallel connection of electronic tubular motors
A maximum of 3 tubular motors can be connected in parallel to
the Troll Comfort DuoFern (e.g. RADEMACHER electronic tubular
motors).
To do so, please refer to the operating manual for the correspond-
ing tubular motor.
Parallel connection of mechanical tubular motors
A cut-o relay is required in order to connect mechanical tubular
motors in parallel.
11. Important information prior to electrical installation and mounting
i
Requirements for blockage detection
Blockage detection is only operational if a mechanical tubular
motor is connected.
Function of inputs E1 and E2
Both inputs can be congured independently of each other.
You can congure the functions of the inputs in menu 9.8.6,
depending on the required purpose of the connected signal
transducers, see page 104.
You can obtain connection and circuit examples from our website
at www.rademacher.de