Instructions

16
i
EN
10. Brief description
The Troll Comfort DuoFern is designed for controlling roller
shutters, Venetian blinds, slats or awnings by connecting a cor-
responding tubular motor as well as lights (or other electrical
appliances).
The Troll Comfort DuoFern can be controlled individually on site
or it can be integrated into a DuoFern network.
The DuoFern receivers (actuators) and transmitters
must be connected to the DuoFern network.
NOTE
You can nd a detailed description of the various functions,
conguration options and possible combinations for the DuoFern
system at:
http://www.rademacher.de/duofern.
Central control of DuoFern devices with a single Troll
Comfort DuoFern.
A DuoFern network generally includes the DuoFern manual
central operating unit or the HomePilot® (together with the
associated user interface) as the central controllers.
Alternatively you can also use the Troll Comfort DuoFern as a
central controller. To do so, you must congure the corresponding
DuoFern mode.
The following DuoFern modes are available for selection,
see page 45.
[ 1 ] = DuoFern receiver
[ 2 ] = DuoFern transmitter
[ 3 ] = Local operation (factory setting)