Instructions
112
EN
5.
Set the lower end
point.
a)
Press and hold the set
button. The roller shut-
ters travel downwards.
b)
Release the button as
soon as the desired end
point is reached.
The lower end point is thereby
stored for the motor.
6.
Back to system menu.
NOTE
The end points will only be stored if:
◆ The tubular motor is allowed to run for at least four seconds
before an end point is reached.
◆ The conguration process is undertaken starting from the
end point that is to be changed.
◆ Check the correct setting of the end points directly after
completing the conguration process with the help of the
operating keys.
19.8.9 Menu 9.8.9 - Conguration of end points for the tubular motor