Instructions

111
EN
19.8.9 Menu 9.8.9 - Conguration of end points for the tubular motor
1.
Select and open menu
9.8.9 - End points.
2.
Allow the motor to run
for at least two seconds
to enable the motor
type to be detected.
3.
Pay attention to the
display:
The tubular motor type
has not been detected,
proceed to point 6.
The tubular motor type
has been detected,
proceed to point 4.
4.
Set the upper end
point.
a)
Press and hold the set
button. The roller shut-
ters travel upwards.
b)
Release the button as
soon as the desired end
point is reached.
The upper end point is thereby
stored for the motor.