Instructions

19.8.9 Menu 9.8.9 - Conguration of end points for the tubular motor

You can use your Troll Comfort DuoFern to congure the end points

for an electronic RADEMACHER tubular motor.

NOTE

◆ [ SET ] is additionally displayed during the end point setting

conguration process.

◆ The end point setting function is only available for

RADEMACHER electronic tubular motors from 2000 onwards.

◆ The end point setting cannot be adjusted for tubular motors

connected in parallel.

◆ The end point function is not available when the light

function is activated.