Instructions

104
EN
19.8.6 Menu 9.8.6 - Conguration of inputs E1 / E2
External controller via the two inputs E1 and E2.
The Troll Comfort DuoFern features two congurable inputs E1
and E2 (230 V / 50 Hz) for connecting external signal transducers
(e.g. Venetian blinds switch / environmental sensor, etc.).
The following congurations are possible:
[ 0 ] O
[ 1 ] UP (roller shutter mode)
[ 2 ] DOWN (roller shutter mode)
[ 3 ] UP (Venetian blinds mode)
[ 4 ] DOWN (Venetian blinds mode)
[ 5 ] UP / Stop / Down
[ 6 ] Automatic mode on/o (closer, NO)
[ 7 ] Automatic mode on/o (opener, NC)
[ 8 ] External wind signal, NO
[ 9 ] External rain signal, NO
NOTE
◆ If manual mode is active, the inputs are not taken into
consideration by the controller (except in the case of the
wind function).
◆ Both inputs can be congured independently of each
other.