Instructions
38
i
i
EN
28. Dismantling
There is also a risk of fatal electric shocks when dismounting the Troll Basic DuoFern.
Follow the safety instructions for electrical connection on page 16.
Procedure for dismantling:
1.
Switch o the mains.
2.
Secure the connector against reconnection and check that the system is de-energised.
3.
Carefully remove the operating unit [ 1 ] from the installation housing [ 3 ].
4.
Remove the frame [ 2 ]
5.
Release the installation housing [ 3 ] from the ush-mounted box and disconnect from the
mains lead.
6.
Leave the connector so that it is secured against reconnection or t with a new unit if required.
29. CE Mark and EC Conformity
The Troll Basic DuoFern (item no. 3650 01 72 / 3650 01 82) complies with the requirements
of the following European and national directives:
Conformity has been veried. The corresponding declarations and documentation are available
on le at the manufacturer’s premises.
RADEMACHER Geräte-Elektronik GmbH
Buschkamp 7
46414 Rhede (Germany)
1999/5/EC
R&TTE directive