Instructions
28
EN
16.1 Switching the automated solar function on/o
The automated solar function enables brightness-dependent control of your roller shutters.
The control signals for this function are provided by a light sensor on the DuoFern network.
When the automated solar function is triggered, your roller shutters will then lower to the
congured sunshine position. Once the solar program is ended, the roller shutters move
completely up to the upper end point.
1.
Press and hold the solar button for approx. 1 second.
2.
Observe the solar LED:
OFF
The automatic solar function is switched o.
ON
The automatic solar function is switched on.
Flashing
The automated solar function is active, the roller shutters will
be lowered to the sunshine position. The LED continues to
ash when the roller shutters are in the sunshine position.