Instructions

20
i
EN
12.1 Manual operation (jog mode)
As soon as Venetian blinds mode is activated with the help of a DuoFern controller (e.g.
HomePilot®), it is possible to manually operate the Troll Basic DuoFern in jog mode.
Jog mode provides a convenient way to congure Venetian blinds. In doing so, the Venetian
blinds motor is powered only as long as the control key is actuated.
NOTE
Pressing the respective operating key [ Up / Down ] for an extended period causes the Troll
Basic DuoFern to automatically move the Venetian blinds to the corresponding end position.
Example for manual control of Venetian blinds in jog mode.
1.
Press briey The Venetian blinds move upwards briey.
or
1.1.
Press The Venetian blinds open.
The Venetian blinds move up to the upper end point.
2.
/ or Causes the Venetian blinds to stop in the interim.
3.
Press briey The Venetian blinds move downwards briey.
or
3.1.
Press The Venetian blinds close.
The Venetian blinds move to the configured ventilation
position or to the lower end point.
Ventilation position, see page 33
If the ventilation position is congured, the roller shutters will rst roll down to this position.
Pressing the [
Down ] key once more causes the roller shutters to continue downwards.