Instructions

13
i
EN
DuoFern functions Value range Factory setting A B C D E F G H
26. End point setting for RADEMACHER
tubular motors via radio **
- -
● ●
27. Reset via radio (3-stage) - -
● ●
28. Single-button operation - -
●
29. Jog mode - -
● ● ●
30. Blinds mode on / o O
● ● ●
31. Standard slat position *
/
#
0 % - 100 % 0 %
● ●
32. auto Tilt after manual stop
direction "Down" *
/
#
on / o On
● ●
33. auto Tilt in sunshine position *
/
#
on / o O
● ●
34. auto Tilt in sunshine position *
/
#
on / o O
● ●
35. auto Tilt after moving to a
%-position *
/
#
on / o On
● ●
36. Slat run time *
/
#
100 ms - 5000 ms 1500 ms (1.5 s)
● ●
37. Motor dead time * 0 ms / 160 ms / 480 ms 0 ms (o)
● ●
8.2 DuoFern network function table
1
The "WR CongTool" software can be downloaded from our website at www.rademacher.de
* Only available via radio
** Not supported by Troll Basic DuoFern.
#
only with Venetian blinds mode activated