Instructions

17
EN
10.1 Automatic function (Aut)
Automatic mode On (factory setting)
All control commands are permitted from a HomePilot
®
.
Automatic mode OFF = manual mode
Only on-site changes or manual changes are implemented
by the HomePilot
®
.
10.2 Boost function (boS)
The boost function enables the room to be heated for a
short time and is automatically deactivated after 15 minutes.
You can activate the boost process in the normal display
with
or .
i
The boost process cannot be started if “Window
open” has been detected by the internal window
open detection (see page 20). Incoming auto-
matic control commands are executed at the
end of the process.