Instructions

11
EN
8.3 Activating installation mode (POS)
8.2 Logging on to the HomePilot
®
If no login is to take place, continue with 8.3.
1. Switch the HomePilot
®
to registering
mode. Login takes place automatically.
2. The logged-on HomePilot
®
appears
as “1” on the display after a successful
login.
If no login takes place within 2 minutes,
“0” appears on the display.
i
1. Activate installation mode by briey
pressing the button.
The drive then moves to the
installation position (POS). The display
ashes as soon as the installation
position is reached.
i
If the device was already logged on to the
HomePilot
®
before inserting the batteries, instal-
lation mode is directly activated.
i
The DuoFern Radiator Actuator must be installed
immediately after logging on to the HomePilot
®
.
Otherwise, “ready for operation” (yellow triangle)
is displayed in the HomePilot
®
.