Instructions

50
EN
Menu overview / 1
.
2 Groups
DescriptionMenu
Name: Name
Function: Select a name for the current group.
A table with the default suggested names is included on page 63.
Additional configuration options are available with the
"WR ConfigTool" software.
1
.
2
.
1
DescriptionMenu
Name: Members
Function: Assign a connected DuoFern actuator as a member of a group.
NOTE
◆ The actuator may not already be a member of this group.
◆ If the desired member number is already assigned, then the
original member will be removed from the group.
Proceed as follows:
1. Select the desired group and the member number for
the new actuator.
2. Select the actuator that you wish to assign.
How to remove a member from a group:
1. Select group and member.
2. Select "FREE".
NOTE
The actuator has now been removed from the group, but is still
connected to the central operating unit.
1
.
2
.
2