Instructions

45
EN
DescriptionMenu
Menu overview / 1
.
1 Actuators
Description
Name: Name
Function: Enter a name for the current actuator. A table with the default
suggested names is included on page 63.
NOTE
You can customise the names using the WR ConfigTool software.
Menu
1
.
1
.
1
Name: Sun position
Function: Setting the position of the sun for the current actuator.
For key function and order, see page 28.
1
.
1
.
2
.
1
Name: Ventilation / intermediate position
Function: ◆ Switch the ventilation position on / off.
◆ Set the ventilation position.
The ventilation position setting corresponds to the settings for
the position of the sun from point 2 on page 28. Repeat these
settings for the ventilation position.
1
.
1
.
2
.
2
DescriptionMenu