Instructions

24
EN
i
Examples of application
Connecting a DuoFern actuator via a radio code.
2
.
2
The radio code can be used to directly control DuoFern actuators and connect them to
the central operating unit. Once the connection has been successfully established, you
can carry out actions such as setting the limit stops for a tubular motor.
This offers a huge advantage for operating and configuring flush-mounted devices,
as it is not necessary to dismantle them.
◆ The radio code is located on the bottom of the respective DuoFern actuator and
on a label attached to the packaging.
◆ For DuoFern radio tubular motors you will find the radio code on the motor and
on a label fitted to the connecting cable.
duofern code
43 00 A1
◆ Example of a radio code label
on the back of a DuoFern actuator.
NOTE
After switching on the power supply, the radio code for the actuator is active for
approximately 2 hours.