Instructions

38
EN
17.1 Logging on devices
i
In this menu you can log DuoFern devices on to the DuoFern Manual
Control.
Two options are available:
◆ Search for devices Automatic device search
◆ Radio code Log on devices via a radio code
Search for devices
1. Switch the desired DuoFern devices
to log-on mode.
To do so, please also read the operating manual of the
respective DuoFern device.
2. By pressing the OK button, the
DuoFern Manual Control starts to search
for devices in log-on mode.
2 minutes The search is active for a maximum of
2 minutes.
Meanwhile, the status LED on the DuoFern
Manual Control flashes green.
2.1 Devices found are listed on the
display.
2.2 If all the desired devices are found,
the search can be terminated prematurely by
pressing the OK button.
or
Cancel the search.