Instructions

32
EN
i
End point setting
3. Open the “End point setting” menu.
4. Move the roller shutter to the desired
position with the up / down buttons.
The end position is stored in the tubular motor
after releasing the up / down button.
4.1 If the desired end position is not
correct, the roller shutter can be moved
again in the opposite direction by pressing
the up / down button in order to repeat
the setting.
The tubular motor moves for approx. 5 sec-
onds and then stops automatically.
4.2 Reset the desired end position
with the up / down buttons.
5. Exit the “End point setting” menu.
15.8 End points