Instructions

29
EN
15.5 Intermediate position
i
This function can be used to set intermediate values, setting the device
to the intermediate value when it is next switched on.
1. Select the desired function
using the multidirectional toggle switch.
i
The subsequent setting of the intermediate position is only
possible when the intermediate function is activated.
2. Open the pop-up window for the intermediate
position.
3. You can move to the desired intermediate
position by pressing and holding the
up / down button.
The position reached is displayed after
releasing the up / down button. This can be
accepted with the OK button or re-adjusted
with the up / down button.
Reset after a stop command
The activation of this function means that the new position is adopted
as the intermediate position if there is a stop command.