Instructions

29
EN
16.1 Menu 9.9.1 - Logging DuoFern actuators on/off
4.
Log-off a registered DuoFern actuator.
a)
Switch the respective DuoFern actuator to
log-off mode.
b)
Start the log-off procedure on the DuoFern
HomeTimer.
c)
The display flashes [ OFF ].
d)
The new number of registered devices is
displayed after successful logout.
e.g. one actuator.
e)
Subsequently registering mode is auto-
matically re-activated.
Repeat 3. a)
g)
Back to menu selection.
or
f)
Log-out the next DuoFern actuator.
5.
Delete all of the registered DuoFern
actuators.
a)
If you want to delete all connections to all as-
signed DuoFern actuators, press and hold the
set key [ ] in menu 9.9.1 for four seconds.
4 sec.
b)
Subsequently all of the connections will be
deleted.