Instructions

27
EN
16. DuoFern settings
In order for your DuoFern HomeTimer to send and receive control signals to/from the DuoFern
network, it is necessary to assign each DuoFern actuator (e.g. DuoFern tubular motor, etc.)
onto the DuoFern HomeTimer
To do so, please read the operating instructions for the respective DuoFern actuator.
Maximum number of connected devices
You can assign a maximum of 20 DuoFern actuators to a single DuoFern HomeTimer.
NOTE
◆ The DuoFern HomeTimer cannot be connected to another DuoFern HomeTimer.
◆ The DuoFern HomeTimer is identified within the DuoFern network as a battery-operated
sensor. For this reason, no other DuoFern sensors can be assigned to the DuoFern Home-
Timer.
◆ Additional information about logging on can be obtained from the login matrix on our
website under: www.rademacher.de
The following section serves to describe all required DuoFern settings for the DuoFern
HomeTimer.
Menu 9.9 - DuoFern Settings
The DuoFern settings are undertaken in Menu 9.9. You can find an overview of all menus and
sub-menus for the DuoFern HomeTimer on pages 8 and 9.
Menu 9 - System settings
Icon Menu Page
9.9 DuoFern settings....................... 27
9.9.1 Logging on and off ..... 28
9.9.7 DuoFern radio code ...... 31
9.9.8 Remote log-on/off ...... 33