Instructions

16
i
1.
2.
3.
EN
11. Assembly
The DuoFern HomeTimer is intended for surface-mounting. The supplied wall bracket [ 3 ]
can be screwed in place or bonded to the wall.
Installation procedure:
1.
Mount the wall bracket in the desired mounting position.
2.
Carefully remove the separating film from the battery compartment, see page 5.
Please ensure that none of the buttons are pressed during the mounting process.
Screws *
or
adhesive
3.
Finally, apply slight pressure to insert the operating unit [ 1 ] and covering frame [ 2 ] into
the wall bracket [ 3 ].
* not included