Instructions

5252
EN
Reversal of rotation direction
You can use this function to subsequently set or correct the rotation direction of connected tubular motors.
Alternative use of the reversal of rotation direction:
Switch between the lighting and device function
In the case of universal actuators for lighting or devices (e.g. DuoFern Universal Actuator or Socket Actuator), reversing the
rotation direction switches between the lighting and device function.
i
The reversal of rotation direction or switching between the lighting and device function can only be performed
if only one device (actuator) is logged on to the selected group. If more than one participant is logged on to the
selected group, the function is blocked.
Not all devices support the reversal of rotation direction function or switching between the lighting
and device function. You should therefore check in the operating manual of the respective device whether the
function is available.
The following applies for the manual transmitter 3248 03 61:
If a multichannel actuator is logged on (e.g. DuoFern Universal Actuator), the reversal of rotation direction
or the switching between the lighting and device function is always applied to both channels.