Instructions
Table Of Contents
- Diese Anleitung ...
- Gefahrensymbole
- Verwendet Darstellungen und Symbole
- Sicherheitshinweise
- Bestimmungsgemäße Verwendung
- Gesamtansicht / Bedientasten
- Geräterückseite
- Kurzbeschreibung des DuoFern Handsender Standards
- Erstinbetriebnahme
- Anmelden von DuoFern Endgeräten (für Art.-Nr. 3232 03 64 / 3248 03 66)
- Anmelden von DuoFern Endgeräten (für Art.-Nr. 3248 03 61)
- Abmelden von DuoFern Endgeräten
- Die Funktion „Aufräumen“ aktivieren
- Endpunkteinstellung
- Drehrichtungsumkehr
- Manuelle Bedienung von Aktoren mit mehreren Kanälen
- Steuerung von Jalousien bzw. Dimmern durch Tipp-Betrieb
- Ein- und ausschalten des Tipp-Betriebs
- Automatikfunktion ein- / ausschalten (für Art.-Nr. 3232 03 64)
- Einstellungen löschen (Reset)
- Technische Daten
- Batteriewechsel
- Vereinfachte EU-Konformitätserklärung
- This manual...
- Hazard symbols
- Symbols and depictions used
- Safety instructions
- Intended use
- General view / operating buttons
- Rear side of device
- Brief description of the DuoFern Manual Transmitter Standard
- Initial commissioning
- Logging on DuoFern end units (for item no. 3232 03 64 / 3248 03 66)
- Logging on DuoFern end units (for item no. 3248 03 61)
- Logging off DuoFern end units
- Activating the “Purge” function
- End point setting
- Reversal of rotation direction
- Manual operation of actuators with several channels
- Controlling blinds and dimmers in jog mode
- Switching jog mode on and off
- Switching the automatic function on/off (for item no. 3232 03 64)
- Deleting all settings (reset)
- Technical specifications
- Battery replacement
- Simplified EU declaration of conformity
4545
EN
1. ... 4.
4.
5.
1. ... 4.
. . .
. . .
▲
Logging on DuoFern end units (for item no. 3232 03 64 / 3248 03 66)
Press the desired device button that you subse-
quently want to use to select the device.
Observe the status LED
Green: Log-on was successful.
Red: The button is already fully allocated.
Repeat points 1 to 4 in order to log on the next
device or the next actuator.
The following applies for devices with multiple channels:
◆ If a device has multiple channels (e.g. DuoFern Universal Actua-
tor), you must select a group button for each channel.
◆ For devices with multiple channels, the device automatically
jumps to point 3 until all channels have been processed.
◆ You must press the stop button if you do not want to allocate a
channel or want to skip a channel.
Logging on a device several times
You can also log on a device several times, for example, to
realise single and group control:
◆ RolloTron Standard DuoFern 1 on button 1
◆ RolloTron Standard DuoFern 2 on button 2
◆ RolloTron Standard DuoFern 3 on button 3
◆ RolloTron Standard DuoFern 1/2/3 on button 4
Observe the maximum possible number of devices per
button (see page 59).
or