Instructions
Table Of Contents
- Diese Anleitung ...
- Gefahrensymbole
- Verwendet Darstellungen und Symbole
- Sicherheitshinweise
- Bestimmungsgemäße Verwendung
- Gesamtansicht / Bedientasten
- Geräterückseite
- Kurzbeschreibung des DuoFern Handsender Standards
- Erstinbetriebnahme
- Anmelden von DuoFern Endgeräten (für Art.-Nr. 3232 03 64 / 3248 03 66)
- Anmelden von DuoFern Endgeräten (für Art.-Nr. 3248 03 61)
- Abmelden von DuoFern Endgeräten
- Die Funktion „Aufräumen“ aktivieren
- Endpunkteinstellung
- Drehrichtungsumkehr
- Manuelle Bedienung von Aktoren mit mehreren Kanälen
- Steuerung von Jalousien bzw. Dimmern durch Tipp-Betrieb
- Ein- und ausschalten des Tipp-Betriebs
- Automatikfunktion ein- / ausschalten (für Art.-Nr. 3232 03 64)
- Einstellungen löschen (Reset)
- Technische Daten
- Batteriewechsel
- Vereinfachte EU-Konformitätserklärung
- This manual...
- Hazard symbols
- Symbols and depictions used
- Safety instructions
- Intended use
- General view / operating buttons
- Rear side of device
- Brief description of the DuoFern Manual Transmitter Standard
- Initial commissioning
- Logging on DuoFern end units (for item no. 3232 03 64 / 3248 03 66)
- Logging on DuoFern end units (for item no. 3248 03 61)
- Logging off DuoFern end units
- Activating the “Purge” function
- End point setting
- Reversal of rotation direction
- Manual operation of actuators with several channels
- Controlling blinds and dimmers in jog mode
- Switching jog mode on and off
- Switching the automatic function on/off (for item no. 3232 03 64)
- Deleting all settings (reset)
- Technical specifications
- Battery replacement
- Simplified EU declaration of conformity
4141
EN
The DuoFern radio system enables, bidirectional data exchange between the various participants of a radio network. All control
commands from a DuoFern transmitter are confirmed by the DuoFern receivers.
You can use the DuoFern Manual Transmitter Standard to manually operate different DuoFern devices remotely (e.g. RolloTron
Comfort/Standard DuoFern or DuoFern actuators for lighting).
Command buttons (UP / STOP / DOWN)
You can use the three command buttons, UP (on/off)/STOP (off)/DOWN (off/on), to send the manual control commands to the
logged-on DuoFern end units, see page 54.
Command buttons (AUTO / MANU) (only for item no. 3232 03 64)
The AUTO and MANU command buttons can be used to switch the automatic function of the logged-on DuoFern end units
off (MANU) or on (AUTO), see page 56 / 57.
Device or group buttons (only for item no. 3232 03 64 / 3248 03 66)
DuoFern manual transmitters 3232 03 64 and 3248 03 66 have 4 or 6 device or group buttons, which you can allocate to any DuoFern
end unit (see page 59). In this way, single and group control of different devices is possible (see page 45).
Brief description of the DuoFern Manual Transmitter Standard
i