Instructions
Table Of Contents
- 1. This manual...
- 1.1 How to use this manual
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 3. Safety instructions
- 3.1 Intended use
- 4. Included in delivery
- 5. General view
- 5.1 Operating buttons
- 5.2 Display and its symbols
- 6. Product description
- 7. Technical specifications
- 8. Installation
- 8.1 Installation sequence
- 9. Menu overview
- 10. Menu 1 - Configuring the sun function
- 11. Menu 2 - Configuring the wind function
- 12. Menu 8 - Service functions
- 12.1 Menu 8.1 - Sun test function
- 12.2 Menu 8.1 - Wind test function
- 12.3 Menu 8.2 - Rotation direction test / change of rotation direction
- 12.4 Menu 8.3 - Checking the battery status
- 12.5 Menu 8.0 - Viewing the software version
- 13. Menu 9 - Logging DuoFern devices on/off
- 13.1 Logging on devices
- 13.2 Logging off devices
- 13.3 Clear-up
- 13.4 Deleting all DuoFern devices
- 14. Reset (factory settings)
- 15. Cleaning and care
- 16. Simplified EU declaration of conformity
6
EN
3. Safety instructions
The use of defective devices can lead to personal injury and dam-
age to property.
◆ Never use defective or damaged devices.
◆ Check the DuoFern Sun/Wind Sensor is intact. Consult our service
department in the event that you discover damage.
◆ If the DuoFern Sun/Wind Sensor is defective, take the associated
system out of operation (e.g. the awning drive) and secure it against
being switched on again until the defect has been rectified.
Improper use leads to an increased risk of injury (e.g. from crush-
ing).
◆ Take due care while adjusting the associated system (e.g. awning
or roller shutter) and keep people away from the moving awning or
roller shutter.
◆ Never use the DuoFern Radio System and its components for the re-
mote control of devices and systems with increased safety-relevant
requirements or where there is an increased risk of accidents. These
require additional safety devices.
i