Instructions
Table Of Contents
- 1. This manual...
- 1.1 How to use this manual
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 3. Safety instructions
- 3.1 Intended use
- 4. Included in delivery
- 5. General view
- 5.1 Operating buttons
- 5.2 Display and its symbols
- 6. Product description
- 7. Technical specifications
- 8. Installation
- 8.1 Installation sequence
- 9. Menu overview
- 10. Menu 1 - Configuring the sun function
- 11. Menu 2 - Configuring the wind function
- 12. Menu 8 - Service functions
- 12.1 Menu 8.1 - Sun test function
- 12.2 Menu 8.1 - Wind test function
- 12.3 Menu 8.2 - Rotation direction test / change of rotation direction
- 12.4 Menu 8.3 - Checking the battery status
- 12.5 Menu 8.0 - Viewing the software version
- 13. Menu 9 - Logging DuoFern devices on/off
- 13.1 Logging on devices
- 13.2 Logging off devices
- 13.3 Clear-up
- 13.4 Deleting all DuoFern devices
- 14. Reset (factory settings)
- 15. Cleaning and care
- 16. Simplified EU declaration of conformity
22
EN
12. Menu 8 - Service functions
The following service functions are available:
◆ Menu 8.1 Sun and wind test functions
◆ Menu 8.2 Rotation direction test and change of rotation direction
◆ Menu 8.3 Display the battery status
◆ Menu 8.0 Software version
The test functions are used to check the connection and the settings of
the controlled device.
i
The sun and wind test functions operate with reduced set
limits for the duration of the test:
◆ Sun = 10 klux
◆ Wind = 10 km/h
i
The test functions should be used after the initial commis-
sioning.
i