Instructions
Table Of Contents
- 1. This manual...
- 1.1 How to use this manual
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 3. Safety instructions
- 3.1 Intended use
- 4. Included in delivery
- 5. General view
- 5.1 Operating buttons
- 5.2 Display and its symbols
- 6. Product description
- 7. Technical specifications
- 8. Installation
- 8.1 Installation sequence
- 9. Menu overview
- 10. Menu 1 - Configuring the sun function
- 11. Menu 2 - Configuring the wind function
- 12. Menu 8 - Service functions
- 12.1 Menu 8.1 - Sun test function
- 12.2 Menu 8.1 - Wind test function
- 12.3 Menu 8.2 - Rotation direction test / change of rotation direction
- 12.4 Menu 8.3 - Checking the battery status
- 12.5 Menu 8.0 - Viewing the software version
- 13. Menu 9 - Logging DuoFern devices on/off
- 13.1 Logging on devices
- 13.2 Logging off devices
- 13.3 Clear-up
- 13.4 Deleting all DuoFern devices
- 14. Reset (factory settings)
- 15. Cleaning and care
- 16. Simplified EU declaration of conformity
17
EN
10. Menu 1 - Configuring the sun function
Sun function
After
10 minutes
After
20 minutes
The awning extends or the shutter
closes completely.
The awning retracts or the shutter
opens.
i
The sun function can only be used for sun shading actu-
ators. It may be necessary to set a running time on the
actuator so as to be able to use the sun function.
The sunshine position of the logged-on actuators is auto-
matically set to 100 % by the sun/wind sensor. The awning
fully extends accordingly in the case of sun or the shutter
closes completely. The sunshine position can be changed
manually. Either directly on the device or using a DuoFern
control depending on the actuator.
i