Instructions
Table Of Contents
- 1. This manual...
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 2.2 Glossary - definition
- 3. Included in delivery
- 4. General view / operating elements
- 5. Product description
- 6. Technical specifications
- 7. Safety instructions
- 7.1 Intended use
- 8. Inserting / changing the battery
- 9. Installation
- 9.1 Installation instructions
- 9.2 Installation examples
- 9.3 Temporary installation
- 9.4 Teaching in the window or door positions
- 9.5 Check the taught-in positions
- 9.6 Final installation of the DuoFern Window/Door Contact
- 10. DuoFern devices (logging on / logging off / clearing)
- 10.1 Logging on DuoFern devices
- 10.2 Logging off DuoFern devices
- 10.3 Clearing the DuoFern network
- 11. Logging on to the HomePilot®
- 12. Deleting all settings
- 13. Closing the housing cover
- 14. Cleaning / maintenance
- 15. Simplified EU declaration of conformity
- 16. Information about environmental protection
- 17. Warranty terms and conditions
9
EN
i
The use of defective devices and improper use can lead
to property damage.
◆ Never use defective or damaged devices.
◆ Check the DuoFern Window/Door Contact for damage.
◆ Consult our customer service department in the event
that you discover damage, see page 32.
7. Safety instructions
7.1 Intended use
Use the DuoFern Window/Door Contact solely to monitor
windows and doors.
Operating conditions
◆ The installation and operation of radio systems is only
permitted for systems and devices where a malfunction
in the transmitter or receiver would not cause a danger to
persons or property or where this risk is already covered
by other safety equipment.
i
i
Other radio systems that transmit on the same
frequency can cause transmission problems.