Instructions
Table Of Contents
- 1. This manual...
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 2.2 Glossary - definition
- 3. Included in delivery
- 4. General view / operating elements
- 5. Product description
- 6. Technical specifications
- 7. Safety instructions
- 7.1 Intended use
- 8. Inserting / changing the battery
- 9. Installation
- 9.1 Installation instructions
- 9.2 Installation examples
- 9.3 Temporary installation
- 9.4 Teaching in the window or door positions
- 9.5 Check the taught-in positions
- 9.6 Final installation of the DuoFern Window/Door Contact
- 10. DuoFern devices (logging on / logging off / clearing)
- 10.1 Logging on DuoFern devices
- 10.2 Logging off DuoFern devices
- 10.3 Clearing the DuoFern network
- 11. Logging on to the HomePilot®
- 12. Deleting all settings
- 13. Closing the housing cover
- 14. Cleaning / maintenance
- 15. Simplified EU declaration of conformity
- 16. Information about environmental protection
- 17. Warranty terms and conditions
7
EN
5. Product description
The DuoFern Window/Door Contact is designed to monitor
window and door positions. It consists of a sensor part and
a magnet.
The sensor uses the magnet to detect the respective win-
dow or door position:
For windows: Open, closed and tilted
For doors: Open, closed
The sensor part is mounted on / in the door or window
frame and the magnet is mounted directly on the door or
window.
Teaching in the dierent positions
The individual window/door positions can be detected and
stored using teach-in processes, see page 18.
Integration into the DuoFern radio system
The DuoFern Window/Door Contact emits dierent control
signals depending on the type of DuoFern device that is
logged on.
i
You can obtain further information in the service
centre on our website at “www.rademacher.de”.
i