Instructions
Table Of Contents
- 1. This manual...
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 2.2 Glossary - definition
- 3. Included in delivery
- 4. General view / operating elements
- 5. Product description
- 6. Technical specifications
- 7. Safety instructions
- 7.1 Intended use
- 8. Inserting / changing the battery
- 9. Installation
- 9.1 Installation instructions
- 9.2 Installation examples
- 9.3 Temporary installation
- 9.4 Teaching in the window or door positions
- 9.5 Check the taught-in positions
- 9.6 Final installation of the DuoFern Window/Door Contact
- 10. DuoFern devices (logging on / logging off / clearing)
- 10.1 Logging on DuoFern devices
- 10.2 Logging off DuoFern devices
- 10.3 Clearing the DuoFern network
- 11. Logging on to the HomePilot®
- 12. Deleting all settings
- 13. Closing the housing cover
- 14. Cleaning / maintenance
- 15. Simplified EU declaration of conformity
- 16. Information about environmental protection
- 17. Warranty terms and conditions
3
EN
i
1. This manual...
...describes how to install and commission the DuoFern
Window/Door Contact.
How to use this manual
◆ Before you begin, please read this manual through com-
pletely and follow all the safety instructions.
◆ Please also read the instruction manuals of the logged-
on DuoFern devices.
◆ This manual is part of the product. Please store it in an
easily accessible place.
◆ When passing the DuoFern Window/Door Contact on to
a third party, this manual must be passed on as well.
◆ Damage resulting from non-compliance with these in-
structions and safety instructions will void the warranty.
We assume no liability for any consequential damage.