Instructions
Table Of Contents
- 1. This manual...
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 2.2 Glossary - definition
- 3. Included in delivery
- 4. General view / operating elements
- 5. Product description
- 6. Technical specifications
- 7. Safety instructions
- 7.1 Intended use
- 8. Inserting / changing the battery
- 9. Installation
- 9.1 Installation instructions
- 9.2 Installation examples
- 9.3 Temporary installation
- 9.4 Teaching in the window or door positions
- 9.5 Check the taught-in positions
- 9.6 Final installation of the DuoFern Window/Door Contact
- 10. DuoFern devices (logging on / logging off / clearing)
- 10.1 Logging on DuoFern devices
- 10.2 Logging off DuoFern devices
- 10.3 Clearing the DuoFern network
- 11. Logging on to the HomePilot®
- 12. Deleting all settings
- 13. Closing the housing cover
- 14. Cleaning / maintenance
- 15. Simplified EU declaration of conformity
- 16. Information about environmental protection
- 17. Warranty terms and conditions
26
EN
11. Logging on to the HomePilot
®
i
The switching commands of the DuoFern Window/Door
Contact can be used to trigger scenes in combination with
the HomePilot
®
. To do so, it must rst be logged on to the
HomePilot
®
.
1. Open the user interface of the HomePilot
®
and click on the
button at the bottom left [ Conguration ] and then on
[ + Logging on devices ].
2. Press the log-on button on the
DuoFern Window/Door Contact.
3. After the log-in is successfully completed, the LED lights up
green for 5 seconds. The DuoFern Window/Door Contact
appears in the log-on dialogue in the HomePilot
®
user
interface.