Instructions
Table Of Contents
- 1. This manual...
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 2.2 Glossary - definition
- 3. Included in delivery
- 4. General view / operating elements
- 5. Product description
- 6. Technical specifications
- 7. Safety instructions
- 7.1 Intended use
- 8. Inserting / changing the battery
- 9. Installation
- 9.1 Installation instructions
- 9.2 Installation examples
- 9.3 Temporary installation
- 9.4 Teaching in the window or door positions
- 9.5 Check the taught-in positions
- 9.6 Final installation of the DuoFern Window/Door Contact
- 10. DuoFern devices (logging on / logging off / clearing)
- 10.1 Logging on DuoFern devices
- 10.2 Logging off DuoFern devices
- 10.3 Clearing the DuoFern network
- 11. Logging on to the HomePilot®
- 12. Deleting all settings
- 13. Closing the housing cover
- 14. Cleaning / maintenance
- 15. Simplified EU declaration of conformity
- 16. Information about environmental protection
- 17. Warranty terms and conditions
22
EN
10. DuoFern devices
(logging on / logging o / clearing)
In order for your DuoFern Window/Door Contact to send
control signals in the DuoFern network, it is necessary to
log any desired DuoFern device (e.g. DuoFern actuator
etc.) on to the DuoFern Window/Door Contact.
Please read the instruction manual for the re-
spective DuoFern device.
i
Battery-operated DuoFern devices cannot be
logged on to the DuoFern Window/Door Contact.
i
The teach-in process for the window/door positions
must be successfully completed, see page 19.
Maximum number of logged-on devices
You can log on a maximum of ve DuoFern devices.
i