Instructions

19
EN
i
9.4 Teaching in the window or door positions
1. Open the window or door.
2. Activate the desired mode:
S
3 sec. = Window mode > LED ashes green
6 sec. = Door mode > LED ashes blue
9 sec. = Inverted door mode > LED ashes red
2 x Then two short acoustic signals
conrm that the rst position is stored.
3.a Close the window or door.
2 x After approx. 3 seconds, two short
acoustic signals conrm that this
position is stored.
The following point 3.b is skipped in door mode!
Additionally in window mode (green LED)
3.b Tilt the window.
2 x After approx. 3 seconds, two short
acoustic signals conrm that this
position is stored.
4. Open the window or door again.
2 seconds A long acoustic signal conrms the
successful teach-in process and the
LED goes o󰀨.
The teach-in process is completed at this point.