Instructions
Table Of Contents
- 1. This manual...
- 2. Hazard symbols
- 2.1 Symbols and depictions used
- 2.2 Glossary - definition
- 3. Included in delivery
- 4. General view / operating elements
- 5. Product description
- 6. Technical specifications
- 7. Safety instructions
- 7.1 Intended use
- 8. Inserting / changing the battery
- 9. Installation
- 9.1 Installation instructions
- 9.2 Installation examples
- 9.3 Temporary installation
- 9.4 Teaching in the window or door positions
- 9.5 Check the taught-in positions
- 9.6 Final installation of the DuoFern Window/Door Contact
- 10. DuoFern devices (logging on / logging off / clearing)
- 10.1 Logging on DuoFern devices
- 10.2 Logging off DuoFern devices
- 10.3 Clearing the DuoFern network
- 11. Logging on to the HomePilot®
- 12. Deleting all settings
- 13. Closing the housing cover
- 14. Cleaning / maintenance
- 15. Simplified EU declaration of conformity
- 16. Information about environmental protection
- 17. Warranty terms and conditions
13
EN
i
9. Installation
9.1 Installation instructions
Temporary installation of the sensor part and magnet
We recommend that you initially x the elements temporarily
with the round adhesive pads in order to carry out the teach-in
process and then a function test prior to the nal installation.
i
The DuoFern Window/Door Contact is not suitable
for use in aluminium window frames.
However, if the installation is to take place, we
recommend installing it on the window frame.
i
Ferrous material or another magnet close to
the sensor and magnet aects the sensitivity
and therefore reduces the maximum installation
distance of 20 mm.