Installation Guide

The trend icon will display when the temperature increase
1℃ compared to last data, or increase 1℃ in 1 hour;
The trend icon will display when the humidity value
increase 3% compared to last data, or increase 3% in 1 hour.
Vice the verse for decrease trends.
When the increase/decrease is less then 1℃ or 3% in 1 hour,
the trend icon will not display.
TRENDS
TROUBLE SHOOTING
Problem Solution
1. Make sure the base station is
powered on
2. Make sure the sensor installed the
batteries
3. If there is no sensor signal received
in 3 minutes, the base station will
stop receiving the signal. Press and
hold【▲/CH】button for 2 seconds
to re-synchronize the sensor.
4. Try to turn off/remove away from
other existing wireless equipment.
5. Replace new batteries.
When you uninstall the sensor or switch
to the other channel, the signal of
previous sensor will become weaker but
won’t disappear immediately, it will clear
the data and display “--.-” or
re-synchronize the new sensor data
next hour until the signal gone
--.-
(No data shown
on outdoor
dashboard)
Uninstall the
sensor or switch
the channel
number on the
sensor, there is
no change.
11