Installation Guide

To snooze the alarm, press【SNOOZE/LIGHT】button to enter
into SNOOZE MODE for 5 minutes, the snooze icon will
display.
To stop the alarm, press any other button, but sounds again if
the alarm condition reoccurs.
To deactivate the alarm, press【ALARM】button to turn it off.
1. When battery-powered base station is lower than 3.6V, or
when the power for remote sensor is lower than 2.5V, the
low battery indicator will display on the screen, it indicate
that it's time to change the batteries.
2. When it is powered by DC adapter, the batteries could
memory the time and date, even though the base station
power off, the memorized setting would not be reset.
3. To avoid the power runs out, the batteries getting rotten and
damage the units, please change batteries on time when
low battery reminder show up.
4. Please use alkaline dry batteries, do not use rechargeable
batteries.
LOW BATTERY ALERT
Press【▼/MEM】button to check the MAX/MIN temperature
and humidity record for 3 channel sensor, the preference set
order is as follows:
Maximum temperature & humidity
Minimum temperature & humidity
Current temperature & humidity
The records will be cleared automatically at 00:00 everyday, or
manually cleared by press and hold【▼/MEM】button.
MAX/MIN RECORD
09