Product Warranty

Please be aware that it is important that, before fitting the suggested tires, the fitment is
allowed by the technical specifications of the vehicle, the vehicle manufacturer and the
relevant homologations. Omni United does not express any view as to the compatibility of
the wheel/tire combination with the technical specifications for the chassis and vehicle.
To Maintain proper vehicle dynamics and load carrying capacity, replacement tires mist
always have a load index and speed symbol equal to to greater than those fitted as original
equipment.
When making plus size fitments, you should consult with the dealer regarding any
suspension or braking system modifications which may be recommended for the vehicle.
Tire Inspection
As a minimum, tires (including the spare tire) should be examined and air pressure checked
monthly and always prior to long trips. They should also be examined if you strike any
unusual object on the road. Tires showing bulges, cracks, cuts, penetrations or uneven wear
must be dismounted and examined by an authorized Omni United tire dealer and replaced
if necessary. Our tires have treadwear indicators in the tread grooves which show up when
the tread has worn to 2/32” remaining. At this point, your tires must be replaced because
they are illegal and dangerous. The mere passage of time (age) does not cause tires to
deteriorate, but rather exposure to outside forces. Such outside forces can include, but are
not limited to: road hazards, punctures, improper repairs, misalignment, under inflated
operation, over inflated operation, excessive heat caused by over deflected operation,
excessive exposure to ozone, improper storage conditions, etc. Tire companies can only
have an impact on a few of these exposures. Tire companies add antioxidants and anti-
oxidants (anti-degradation compounds) to minimize degradation. Omni United believes
that since there is no way to accurately predict what outside forces a tire will be exposed
to there is no scientifically supportable age limit that can be set for tires. To avoid cosmetic
damage, use a mild soap solution to clean sidewalls and rinse off with low-pressure tap
water. Never apply cleaners or dressings to enhance sidewall appearance to avoid removal
of antioxidants which are intended to prevent ozone degradation. The removal of anti-
oxidants may degrade the rubber and can lead to sidewall cracking. Use of high-pressure
sprayers may cause sidewall damage.
Tire Rotation