Owner`s manual

9 Point Inspection Before Every Use

Item Action

Front Brake Squeeze Brake Handle on Right Controller and push the

scooters to see if it rolls easily. If so you will need to tighten

the brake. Tighten bolt until the scooter will not move with the

brakes applied.

Rear Power/Disc

Brake

Listen for any grinding or squealing from the tire while the

brake is applied. If so, contact a Rad2Go service technician for

assistance.

Brake Fluid Check fluid gage of the front of the left controller to ensure that

the brake fluid is above the indicated level.

Electric Switch Handle Turn Throttle counter clockwise and release; the Throttle should

spring back to stop position. If not contact a Rad2Go service

technician.

Tire Check tire pressure to 36 PSI

Controller/ Motor Check usage and condition

Battery Check power level by looking at the gauge on the handle bar or

a voltage meter (26V-12V).

Signal Check to make sure your lights are working.

Nuts and Bolts Check to make sure that all nuts and bolts are tightened and

secure.

Important Notes:

1. Always perform a routine check and maintenance. Doing so will enable you

to better protect yourself and your vehicle.

2. Any damage to parts, whether normal or abnormal, please check with the

dealer and Rad2Go technician before riding.