User manual

Digital B-RAD USER MANUAL
New World Technologies Inc. Page • 4
V2014.07.03
1.0 General Information
1.1 System Components
The Digital B-RAD Tool System is shipped from New World Technologies Inc. in a
case with the following parts:
- Digital B-RAD Tool (Figure 1.1-1)
- Two RAD Li-Ion Battery Packs (Figure 1.1-2)
- RAD Battery Charger (Figure 1.1-3)
- Standard Reaction Arm and Snap Ring (Figure 1.1-4)
- Calibration Certificate
- User Manual
Figure 1.1-1: Digital B-RAD Tool
Figure 1.1-2: RAD Li-Ion Battery Pack
Figure 1.1-3: RAD Battery Charger
Figure 1.1-4: Standard Reaction Arm
Note: Some distributors may ship additional parts along with the Digital B-RAD Tool System.
1.2 Specifications
1.2.1 Torque Ranges
The following table outlines the torque ranges, in Foot-Pounds and Newton-Meters, of each
Digital B-RAD Tool System:
Imperial
Metric
DB-RAD 500
100-500 FtLb
or
DB-RAD 675
135-675 Nm
DB-RAD 1000
300-1000 FtLb
or
DB-RAD 1350
400-1350 Nm
DB-RAD 1500
500-1500 FtLb
or
DB-RAD 2000
675-2000 Nm
Table 1.2.1: Torque Ranges
1.2.2 Battery Specifications
Ensure that all Battery Specifications are followed when utilizing the Digital B-RAD Tool
System.
Battery Output
Voltage
18 VDC
Current
30 A
Charge Time
60 minutes
Charger Voltage
Input
115 VAC / 230 VAC
Output
12 – 18 VDC
Charger Output Current
2.5 A
Table 1.2.2: Battery Specifications