User manual

Digital B-RAD USER MANUAL
New World Technologies Inc. Page • 16
V2014.07.03
3.3.9 Change the Torque Units
This function allows the operator to change the torque units to Foot-Pounds (FtLb) or
Newton-Meters (Nm). When the units are changed, the Target Torque value, Preset Torque
Values and Calibration Values are automatically converted to the selected units.
To change the torque units:
1. Press the “Centre” button.
Result: The Main Menu screen will be displayed (Figure 3.3.9-1).
Figure 3.3.9-1: Main Menu Screen
2. Use the “Up Arrow” button and the “Down Arrow” button to highlight the “Units”
option.
3. Press the “Centre” button to select the “Units” option.
Result: If the units were FtLb, they will change to Nm. If the units were Nm, they will
change to FtLb.
Result: The Main screen will be displayed. Confirm that the correct units are displayed
(Figure 3.3.9-2).
Figure 3.3.9-2: Different Units Displayed on the Main Screen
3.3.10 Set the Clock
This function allows the operator to set the time and date on the Digital B-RAD.
To set the clock:
1. Press the “Centre” button.
Result: The Main Menu screen will be displayed (Figure 3.3.10-1).
2. Use the “Up Arrow” button and the “Down Arrow” button to highlight the “Setup”
option.
3. Press the “Centre” button to select the “Setup” option.
Result: The Setup Menu screen will be displayed (Figure 3.3.10-2).