User manual

Digital B-RAD USER MANUAL
New World Technologies Inc. Page • 15
V2014.07.03
To change the Target Torque:
1. Use the “Up Arrow” button to increase the Target Torque and use the “Down Arrow”
button to decrease the Target Torque.
Result: The Target Torque displayed on the Main screen will change. Once the desired
Target Torque is displayed, the Digital B-RAD is ready for a Torque Cycle.
3.3.8 Save a Preset
This function allows the operator to modify any of the ten Presets. Presets are pre-defined
Target Torques. For more information on using Presets, refer to Section 3.3.1 – Select a
Preset.
To save a Preset:
1. Change the Target Torque to the desired torque value (Figure 3.3.8-1). Refer to
Section 3.3.7 – Change the Target Torque.
2. Press the “Centre” button.
Result: The Main Menu screen will be displayed (Figure 3.3.8-2).
Figure 3.3.8-1: Main Screen
Figure 3.3.8-2: Main Menu Screen
3. Use the “Up Arrow” button and the “Down Arrow” button to highlight the “Save”
options.
4. Press the “Centre” button to select the “Save” option.
5. Use the “Up Arrow” button and the “Down Arrow” button to highlight the Preset to
be modified (Figure 3.3.8-3).
Note: The Target Torque previously saved as this Preset will be overwritten by the new
Target Torque.
6. Press the “Centre” button to select the Preset.
Result: The Target Torque is now saved as the Preset and is displayed in the Presets Menu
(Figure 3.3.8-4).
Figure 3.3.8-3: Presets Menu
Figure 3.3.8-4: Presets Menu