Specifications

Chapter 6 Diagnostics and Troubleshooting Installation and Operation Manual
6-6 Monitoring Performance ASMi-54 Ver. 1.0
Displaying the SHDSL PME Port Status
 To display the SHDSL PME port status:
1. Select Main Menu>Monitoring>Physical Ports>SHDSL>Status.
The SHDSL PCS Status screen appears (see
Figure 6-8 ).
2. Select PME Status.
The SHDSL PMS Status screen appears (see
Figure 6-9 ). The parameters
are described in
Table 6-4 .
3. Press <F> to select the PME number.
4. Press <F> to select the PCS number.
ASMi-54
Main Menu > Monitoring > Physical Ports > SHDSL > Status > PME
Status
PME (Physical Medium Entity) Number (1)
PCS (Physical Coding Sublayer) Number (1)
Administrative Status (Up)
Operation Status (Up)
SHDSL PME State (Data)
SHDSL PME Rate (5696kbps)
Current Noise Margin (19dB)
Current Loop Attenuation (0dB)
F-Forwards ; B-backwards
ESC-Previous menu; !-Main Menu; &-Exit
Figure 6-9. SHDSL PME Status Screen
Table 6-4. SHDSL PME Status Parameters
Parameter Description
PME (Physical Medium
Entity) Number
The SHDSL PME number to be handled.
PCS (Physical Coding
Sublayer) Number
The SHDSL PCS number to which the PME line belongs.
Administrative Status Whether the interface is enabled (up) or disabled (down).
Operation Status The actual operational status of the SHDSL PCS
(Up or Down).
SHDSL PME State The current operational state
(PreActivation, Activation, or Data).
SHDSL PME Rate The actual PME rate (192…5696).
Current Noise Margin The current SNR margin for this endpoint (0…30).
Current Loop Attenuation The current loop attenuation for this endpoint (0…127).