Specifications

Chapter 6 Diagnostics and Troubleshooting Installation and Operation Manual
6-4 Monitoring Performance ASMi-54 Ver. 1.0
ASMi-54
Main Menu > Monitoring > Physical Ports > Ethernet > Status
Port (1)
Administrative Status (Enable)
Operation Status (Up)
Speed & Duplex (100Mbps – Full Duplex)
Flow Control (Enable)
F - Forwards; B - Backwards
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 6-6. Ethernet Status Screen
Table 6-2. Ethernet Status Parameters
Parameter Description
Port The port slot number to be handled.
Admistrative Status Whether the interface is enabled or disabled.
Operation Status The actual operational status of the link (Up or Down).
Speed & Duplex The current data rate and duplex mode of the link
(100 – full, 100 –half, 10 – full, or 10 - half).
Flow Control Whether flow control is enabled or disabled.
Displaying the SHDSL PCS Port Status
 To display the SHDSL PCS port status:
1. Select Main Menu>Monitoring>Physical Ports.
The Monitoring Physical Ports screen appears (see
Figure 6-4 ).
2. Select SHDSL.
The Monitoring Physical Ports - SHDSL screen appears
(see
Figure 6-7 ).
3. Select Status.
The SHDSL PCS Status screen appears (see
Figure 6-8 ). The parameters
are described in
Table 6-3 .
4. Press <F> to select the PCS number.