Specifications

Chapter 4 Configuration Installation and Operation Manual
4-22 Configuring for Operation ASMi-54 Ver. 1.0
Configuring a Bridge Port
 To configure a bridge port:
1. Select Main Menu>Configuration>Applications>Bridge>Bridge Ports.
The Bridge Ports screen appears (see
Figure 4-23 ).
2. Select Bind to define which port the bridge port should be bound to.
The Bind screen appears (see
Figure 4-24 ).
• The Bind option does not appear for Bridge port 1 (Management host). The
host cannot be bound.
• Usually there is not need to bind BPs, as all are bound in the default
configuration.
ASMi-54
Configuration > Application > Bridge > Bridge ports > Bind
1. Fast Ethernet [number] / PCS [Number] ...(1)
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 4-24. Bridge Ports Bind Screen
3. Select Fast Ethernet, and type the number of the Fast Ethernet port / PCS to
which you want to bind the bridge port.
The Bridge may have a total of six Bridge Ports (BP). BP1 is dedicated to the IP
Host. BP2-6 may be bound to Fast-Ethernet ports 1–4 or to the PCS port.
4. Press <S> to save the changes.
5. Press <ESC> to return to the Bridge Ports menu.
6. In the Bridge Ports menu, configure the Bridge Ports parameters
(see
Table 4-7 ). The settings pertain to the port to which you bound the
bridge port in the previous steps.
7. Press <S> to finish the bridge ports configuration.
Configuring VLAN Membership
 To configure VLAN Membership:
1. Select Main Menu>Configuration>Applications>Bridge.
The Bridge screen appears (see
Figure 4-20 ).
2. Select VLAN Membership.
The VLAN Membership screen appears (see
Figure 4-25 ).
3. Select VLAN ID, and type the VLAN ID you wish to configure.
4. Select Egress Tagged Ports. Define the set of ports to transmit packets for
this VLAN as tagged.
Note
Note