Specifications

Installation and Operation Manual Chapter 4 Configuration
ASMi-54 Ver. 1.0 Configuring for Operation 4-19
ASMi-54
MAC table handling
1. MAC address … (00-00-00-00-00-00)
2. VLAN ID [1-4094] (1)
3. Bridge port [1 – N] (1)
S - Save
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 4-22. Static MAC Table, Add Mode
 To remove a static address from the table:
1. Select Main Menu>Configuration>Applications> Bridge>Static MAC Table.
The Static MAC Table screen appears (see
Figure 4-21 ).
2. Select a MAC address that you want to remove and press <R>.
The MAC address is deleted from the table.
 To clear the MAC table:
1. Select Main Menu>Configuration>Applications>Bridge>Static MAC Table.
The Static MAC Table screen appears (see
Figure 4-21 ).
2. Press <C> to clear the table.
The following message appears:
Are you sure (Y/N)?
3. Press <Y> to confirm deletion of all MAC addresses from the table.
Configuring the Bridge Ports
The unit is supplied with the Bridge Ports preconfigured for basic use. The
factory-set configuration is shown in
Table 4-6 .
To reconfigure the ports, first delete the configuration for each port.
Table 4-6. Factory Set Bridge Port Settings
Bridge Port Configured to
1 Reserved for management host
2 Fast Ethernet Port 1
3 Fast Ethernet Port 2
4 Fast Ethernet Port 3
5 Fast Ethernet Port 4
6 PCS Port 1
Note