Specifications

Chapter 4 Configuration Installation and Operation Manual
4-16 Configuring for Operation ASMi-54 Ver. 1.0
ASMi-54
Main Menu > Configuration > Physical Layer > SHDSL > PME
Configuration > Current Margin
1. –10 dB 17. 6 dB
2. –9 dB 18. 7 dB
3. –8 dB 19. 8 dB
4. –7 dB 20. 9 dB
5. –6 dB 21. 10 dB
6. –5 dB 22. 11 dB
7. –4 dB 23. 12 dB
8. –3 dB 24. 13 dB
9. –2 dB 25. 14 dB
10. –1 dB 26. 15 dB
11. 0 dB (Disable) 27. 16 dB
12. 1 dB 28. 17 dB
13. 2 dB 29. 18 dB
14. 3 dB 30. 19 dB
15. 4 dB 31. 20 dB
16. 5 dB 32. 21 dB
>
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-18. SHDSL PME Current Margin Screen
The SHDSL PME Worst Margin screen is the same as the SHDSL PME Current
Margin screen except for the heading.
Configuring the Internal Bridge
The internal bridge connects the unit’s ports. Configure the bridge for it to
properly process the VLAN tags to maintain priority of the data flows.
The bridge operates in transparent mode (learning is disabled) or filtered mode
(learning and filtering are enabled).
 To configure the internal bridge:
1. Select Main Menu>Configuration.
The Configuration screen appears (see
Figure 4-1 ).
2. Select Applications.
The Applications screen appears (see
Figure 4-19 ).
3. Select Bridge.
The Bridge screen appears (see
Figure 4-20 ). The parameters are
described in
Table 4-5 .
4. For Static MAC Table configuration, see
Using the Static MAC Table.
5. For Bridge Port configuration, see
Configuring the Bridge Ports.
Note