Specifications

ASMi-54 Ver. 1.0 Configuring for Management 4-1
Chapter 4
Configuration
This chapter describes how to configure the ASMi-54 for management and
operational tasks. Configuration screens are shown, and configuration
parameters explained.
The configuration screens illustrated in this chapter are taken from a terminal
screen, but most of the menus are similar to those viewed in Telnet and
ConfiguRAD.
This chapter includes the following sections:
• Configuring for Management
• Configuring for Operation
• Additional Tasks.
For a complete list of all menu items, see menu in
Chapter 3 .
For instructions on accessing and navigating the screens, see
Chapter 3 .
4.1 Configuring for Management
This section describes how to configure the ASMi-54 for management functions.
Entering Device Information
The ASMi-54 management software allows you to assign a name for the unit, and
specify its location to distinguish it from the other devices installed in your
system. A contact person can also be assigned. Each of these fields can hold up
to 50 characters.
 To enter device information:
1. Select Main Menu>Configuration.
The Configuration screen appears (see
Figure 4-1 ).
2. Select System.
The Configuration System screen appears (see
Figure 4-2 ).
3. Select Management.
The Management screen appears (see
Figure 4-3 ).
4. Select Device Info.
The Device Information screen appears (see
Figure 4-4 for a typical
screen example). The description of the unit is factory set.
Note